| Transmitter |
Wiremap |
Cable type |
CAT5, CAT6 (STP & UTP) |
| Test with switch directly |
Yes |
| Max range |
600m |
| Crimping |
Identify response speed |
≤ 1second |
| Test type |
8 cores |
| Min. recognition length |
10cm |
| Length |
Cable type |
CAT5, CAT6 (STP & UTP) |
| Test range |
2~500m |
| Accuracy |
±1.6m |
| Breakage location |
Yes |
| Scan |
Cable type |
CAT5, CAT6 (STP & UTP) |
| Max. signal voltage |
5V+/-1.0V p-p(audio file) |
| Frequency |
455KHz |
| Dual mode to scan cable |
AC filter & Non AC filter |
| Max range |
600m (RJ45)/ 400m(RJ11) |
| POE |
Test range |
DC 5~60V standard / non-standard PoE switch |
| Power supply core/Jumper method |
End jumper/middle jumper/8-pin power supply/unknown |
| PSE type |
IEEE 802.3af/at,Non-standard |
| Port flash /Link test |
Full-duplex/half-duplex recognition |
Yes |
| Auti-negotiation/Non-anto-negotiation |
Yes |
| Switch type |
10M/100M/1000M |
| LCD display |
128*64 Dot-matrix with backlight |
| Power supply |
3.7v 1400mAh lithium battery |
| Size |
125mm*70mm*32mm |
| Auto-off time |
15min, 30min, 60min, OFF |
| Voltage protection |
DC48V 5mA |
| Max working current |
<150mA |
| Receiver |
Sentivity adjustable |
Yes |
| NCV |
AC 70V~1000V 50/60Hz |
| Lamp |
Yes |
| Wiremap |
Yes |
| Battary type |
3.7v 1400mAh lithium battery |
| Size |
198mm*50mm*28mm |
| Standby current |
<35mA |
| Max working current |
<280mA |
| Other functions |
Low pressure tips |
3.5v+/-0.1v |
| Low power automatic shutdown |
150min/30min/60min/OFF |
| Charging method |
DC 5V 1A Type-C |
| Operating temperature/humidity |
32~122°F (0~50°C）/90% non-condensing |
| Storage temperature |
14~122°F (-10~50°C） |
