- The complete Passive Power over Ethernet Kit contains two pieces - INJECTOR and SPLITTER.
- Suitable for products that basically do not support Power Over Ethernet.
- Applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.
- Supplied standardly up to 60V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.)
- Passive PoE`s range is normally form 30-40 metres/100- 130 ft (the real distance depends on the power supply, type of cable and powered device).
- Data: PIN 1/2 & 3/6
- Power: PIN 4/5+ & 7/8
- Data in: Connects PC/HUB/Switch
- Case of material: ABS
- Ethernet Data rate: 10/100 Mbps
- Ethernet Cable: TIA/EIA 568 Cat.5
- Ethernet Cable Connector: RJ-45
- Operating Temperature: 0 - 40 Degree
- Storage Temperature: -40 - 70 Degree
- Operating Humidity: 10% to 80% RH
- Storage Humidity: 5% to 90% RH
- DC PLUGS & JACKS: 2.5 x 5.5 x 12mm
|
